Veneer fingerjointing machines
Ludy Machinery, a solid partner in design and construction of veneer fingerjointing machines.
Interested in one of our machines? Contact us!
Looking for a perfect match? Download a white paper (.pdf).
Ludy Machinery designs, constructs, assemblies and exports the following machines:
Finger jointing machine to joint veneer in the length, with an invisible joint.
> Details
The glue will be applied between the flanks from the fingers and replaces the tape. The additional charge for this investment repays itself in 2-3 years.
> Details
Economic version of the standard fingerjointer with the same mechanical quality, but a more simple winder and electronic control mechanism.
> Details
Jointing machine without cutters,
> Details
Slitter cutting machine to cut the master rolls of veneer into edges. Try this veneer cutter.
> Details
The double rewind table is used to rewind rolls of 200m into smaller rolls of 25, 50 or 100m. The roll can be packed at the same time. The double rewind table needs an operator. It goes faster than on the slitter and gives it more capacity.
> Details
The blister rewind table is used to make small roll lengths from 2.5m to 5 or 10m.
> Details
Machine to cut master rolls of raw veneer till 0,9mm.
> Details
Laminating process of non-woven fleece and veneer, in order to make veneer more resistant for profile lamination with difficult forms and sharp edges.
> Details
Machine to apply hot melt on master rolls.
> Details
Parquet machine with glue joint in development!
> Details